Request A Quote
To request a quote, please fill out the form below.
You can also call us at 800-689-4344 or email us at info@3duniverse.org.
Or fill out the form below, and we'll reach out within one business day.
Teachers, Educators, & Administrators
If you're part of an academic institution, we're committed to collaborating with you to arrange exclusive pricing and flexible payment options. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
State & Local Goverment Agencies
We offer special pricing for government agencies. 3D Universe is an authorized GSA contractor and has UEI, CAGE, and SAM codes available. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
Overview
Bambu Lab X2D
Product Features
- Dual-Nozzle 3D Printing
- Faster Multi-Color Printing & Cleaner Support Removal
- 300 °C Nozzle & 65 °C Active Chamber Heating
- Closed-Loop Servo Motor Extruder
- Full Filament Path AI Detection
- 256 × 256 × 260 mm³ Print Volume
- Voltage Range: 100 – 120 V
- To connect more than two AMS (including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed
* Cybersecurity compliant with EU RED Article 3.3(d)(e) and ETSI EN 303 645 V2.1.1:2020.
Why Choose Bambu Lab X2D
Dual Nozzle System.
Add more color, more details and more fun.
Tough and soft. In one print
Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.
Swap colors instantly.
Dual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste.
Finer. Sharper. True to the design.
Cool it. Before gravity makes it droop.
Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
Hot Enough Isn't Enough. Heat It Even.
The X2D pairs a 300 °C nozzle with a 65 °C actively heated chamber - hot enough for the majority of engineering filaments like ABS, ASA, and nylon. But temperature alone isn't the point - the active chamber distributes heat evenly, so layers bond strongly from edge to edge. Your large engineering prints come out strong and flat.
Calibration adapts to wear and material changes.
Most printers calibrate flow with a single K factor and use it in all scenarios. Bambu Lab doesn't. Flow Dynamics Calibration³ builds a time-varying, nonlinear model of your entire extrusion system. So whether there's minor residue inside the nozzle, gradual nozzle wear, or slightly damp filament, the system detects, calibrates, and compensates. Smooth surfaces and sharp edges stop being luck. They repeat.
PMSM Servo System: Smoother surfaces start inside the extruder.
Extruder gears grind into filament as they feed it, causing small pressure fluctuations that show up as tiny lines on the surface. Exclusive to Bambu Lab, the PMSM servo system⁵ counters this in real time. With resistance and position sampling at 20 kHz, it adjusts electromagnetic torque on the fly, smoothing out every micro-fluctuation before it reaches the surface.
Smooth surface quality.
Extrusion pressure stays precisely controlled, so flow stays stable, and surface finish remains clean and uniform, print after print.
Compensation makes corners sharp and details clean.
Ringing and ghosting blur edges at high speed. Active Vibration Compensation cancels them in real time - so edges print crisp, no matter how fast.
AI Camera keeps an eye on your prints.
Before printing, the AI Liveview Camera and Toolhead Camera scan the build plate for foreign objects and verify plate placement. During printing, they watch for spaghetti, nozzle clumping, and purge-chute jams in real time - pausing the job before it wastes hours of time and filament.
- Start Check
- Spaghetti
- Nozzle Clumping
- Purge Shoot Jam
Fully-equipped sensors cover every critical stage.
1 senso spans the entire system - monitoring the feeding path, printing process, thermal environment, and machine safety in real time. Every variable that affects your print is measured, checked, and acted on.
All the must-haves for everyday use.
Clean air. Always.
XD runs a three-stage filtration system every time it prints. A G3 pre-filter, an H12 HEPA filter, and a coconut-shell activated carbon layer work together to reduce odors and airborne particles. The same trusted filtration system used in H Series printers. Quiet. Clean. Ready for everyday spaces!
Safe for your living room.
The X2D is UL2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic materials. Confirmed for low particle and VOC emissions, so you can print in your personal space with peace of mind.
Tool-free nozzle swap.
Swap nozzles in seconds. No tools, no hassle - just easy and simple for first time users!
Quiet enough for overnight prints.
Active Motor Noise Canceling and a noise-optimized air duct keep the X2D below 50 dB under typical conditions. Quiet enough for overnight printing.
See every detail, remotely.
Brighter chamber lighting makes live View and time-lapse clearer than ever so you can check on your prints from anywhere.
One million switches and still smooth!
X2D's dual-nozzle system completed over 1 million switch cycles in life-cycle testing, maintaining smooth and consistent motion throughout. Built for years of dependable use.
A printer that updates like your phone.
X2D prints beautifully the day it arrives. And it gets better with every update. Major firmware updates land roughly every three months⁸ - new features, better performance, all pushed straight to your machine.
Unboxing Video
Product Variation Notice
Depending on the production batch, your X2D may or may not include a silicone wiper near the nozzle-switching area. Its function has since been replicated through a software update, so both versions perform identically.
Package Contents
Package Contents
Specifications
Specifications
Printing Technology:
Fused Deposition Modeling
Body
Build Volume (W*D*H):
Main Nozzle Printing: 256*256*260 mm³
Auxiliary Nozzle Printing: 235.5*256*256 mm³
Dual Nozzle Printing: 235.5*256*256 mm³
Total Volume for Two Nozzles: 256*256*260 mm³
Chassis:
Plastic and Steel
Outer Frame:
Plastic, Glass, and Metal
Dimensions and Weight
Physical Dimensions:
392*406*478 mm³
Net Weight:
16.25 kg
Toolhead
Main Extruder Gear:
Hardened Steel
Main Extruder Motor:
Bambu Lab High-precision Permanent Magnet Synchronous Motor
Auxiliary Extruder Gear:
Hardened Steel
Auxiliary Extruder Motor:
Stepper Motor
Nozzle:
Hardened Steel
Max Nozzle Temperature:
300 °C
Included Nozzle Diameter:
0.4 mm
Supported Nozzle Diameter:
0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter:
Built-in
Filament Diameter:
1.75 mm
Environment Requirements
Working Temperature:
10 °C-30 °C
Electronics
Touchscreen:
5-inch 1280*720 Touchscreen
Storage:
Built-in 8 GB EMMC and USB Port
Control Interface:
Touchscreen, mobile App, PC App
Motion Controller:
Dual-core Cortex-M4 and Single-core Cortex-M7
Application Processor:
Quad-core ARM with dedicated NPU
Wi-Fi
Operating Frequency:
2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)
2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP):
2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol:
IEEE 802.11 a/b/g/n
Heatbed
Supported Build Plate Type:
Textured PEI Plate, Smooth PEI Plate, Cool Plate SuperTack, Engineering Plate
Max Heatbed Temperature:
120 ℃
Speed
Max Speed of Toolhead:
1000 mm/s
Max Acceleration of Toolhead:
20,000 mm/s²
Max Flow for Hotend (Standard Flow Hotend):
40 mm³/s
(Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Max Flow for Hotend (Optional High Flow Hotend):
65 mm³/s
(Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Chamber Temperature Control
Active Chamber Heating:
Supported
Max Temperature:
65 °C
Air Purification
Pre-filter Grade:
G3
HEPA Filter Grade:
H12
Activated Carbon Filter Type:
Granulated Coconut Shell
VOC Filtration:
Supported
Particulate Matter Filtration:
Supported
Software
Slicer:
Bambu Studio
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating System:
MacOS, Windows, Linux
Network Control
Ethernet:
Not Available
Wireless Network:
Dual-Band Wi-Fi
Network Kill Switch:
Not Available
Removable Network Module:
Not Available
802.1X Network Access Control:
Not Available
Cooling
Part Cooling Fan:
Closed Loop Control
Cooling Fan for Hotend:
Closed Loop Control
Main Control Board Fan:
Closed Loop Control
Chamber Exhaust Fan:
Closed Loop Control
Chamber Heat Circulation Fan:
Closed Loop Control
Auxiliary Part Cooling Fan:
Closed Loop Control
Filament Supported
Main Hotend:
PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET
Auxiliary Hotend:
PLA (excluding PLA Aero), PETG, ABS, ASA, TPU for AMS, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PET
Auxiliary Hotend (print with caution¹):
PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU for AMS, Support for PA/PET
Sensor
Live View Camera:
Built-in; 1920*1080
Toolhead Camera:
Built-in; 1600*1200
Door Sensor:
Supported
Filament Run Out Sensor:
Supported
Filament Tangle Sensor:
Supported
Filament Odometry:
Supported with AMS
Power Loss Recovery:
Supported
Electrical Requirements²
Voltage:
100-120 VAC , 50/60 Hz
Max Power³:
1100 W@110 V
Steady-State Power:
PLA (25 °C): 250 W@110 V
PC (25 °C): 550 W@110 V
Please purchase the version corresponding to your region's voltage. Using the Printer in different regions, you may need to purchase a power adapter accordingly.
