Kodak HIPS Filament 1.75mm - 750g

High impact resistance, dissolves in limonene

By Kodak

WARNING: This Filament - when used in the operation of 3D Printers or 3D Pens - can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer. www.P65Warnings.ca.gov
ALWAYS OPERATE THIS PRODUCT IN A WELL-VENTILATED AREA.

NOTE: 3D Universe is authorized to sell this product in the United States, only.

14.99
$24.99


Availability: In-Stock Now

Kodak HIPS is as easy to print as ABS, although much less likely to warp, which makes it another great alternative to classic PLA for models requiring higher impact resistance. It works as a great dissolvable support material because it is easily removed with a limonene solution.

Introducing Kodak HIPS Filament

HIPS is as easy to print as ABS, although much less likely to warp, which makes it another great alternative to classic PLA for models requiring higher impact resistance. It works as a great dissolvable support material because it is easily removed with a limonene solution. The material is a good electrical insulator, which can be sanded and painted with acrylic paints.

This polymer complies with section 201(s) of the US Federal, Drug, and Cosmetic Act, and Parts 182, 184 and 186 of the Food Additive Regulations.

Benefits

  • A filament with some of the best characteristics of PLA and ABS
  • High-resolution smooth surfaces
  • Great interlayer adhesion
  • Resistance to shattering, low warp
  • It can be used as a dissolvable support material for ABS (soluble with limonene, citric acid)

Recommended Print Settings

Print temperature: 220-260C
Print bed temperature: 100-105C
Cooling fans: On
Closed environment: Not required

Tolerance

+/- 0.02mm diameter
99% roundness accuracy
<0.02% moisture content

Physical Properties

Density: 1.04 g/cm3 (Test method: ISO 1183/B)
Melt Mass-Flow Rate (MFR) (200C/21.6kg): 3 g/10 min (Test method: ASTM 1238)

Works With 3D Printers That Accept 1.75 mm Filament

Kodak HIPS 1.75mm is designed for printers that work with standard 1.75 mm size filaments. This includes, but is not limited to:

  • Prusa i3
  • Creality3D CR-10
  • FlashForge Creator
  • Delta Maker
  • Leapfrog Creator
  • MakerBot Replicator 2
  • Makergear M2
  • PowerSpec 3D Pro
  • Printrbot Simple and Pro
  • Tinkerine Ditto
  • Type A Machines

Note: Kodak 3D printing materials are manufactured by SMART International. The Kodak trademark, logo and trade dress are used under license by SMART International.

Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!