Bambu Lab PLA Matte (1.75mm, 1kg) Refill

High-Quality Filament for Your 3D printer

Product Features:

  • Easy to Print & Beginner Friendly
  • Matte Surface Texture
  • Biodegradable
  • Diameter: 1.75mm +/- 0.03mm

Additional Information:

  • AMS Compatible

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

Sold Out ($27.99)

Bambu Lab PLA Matte Refill

Accessory Compatibility

Recommended Not Recommended

Build Plate                                                                          

Cool Plate, High Temperature Plate or Textured PEI Plate.  

Engineering Plate


All Size / Material



Bambu Liquid Glue or Glue Stick


PLA Matte Hex Code Table

Color Hex Code Display#9B9EA0#AE96D4

Ivory White                                                        


Latte Brown



Desert Tan



Ash Gray



Lilac Purple



Sakura Pink



Mandarin Orange



Lemon Yellow



Scarlet Red



Dark Red



Dark Brown



Dark Green



Grass Green



Ice Blue



Marine Blue



Dark Blue






RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.

Recommended Printing Settings

Drying Settings (Blast Drying Oven):
55 °C,8 h

Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)

Nozzle Temperature:
190 - 230 °C

Bed Temperature (with Glue):
35 - 45 °C

Printing Speed:
< 300 mm/s

Physical Properties

1.31 g/cm³

Vicat Softening Temperature:
63 °C

Heat Deflection Temperature:
58 °C

Melting Temperature:
163 °C

Melt Index:
39.4 ± 3.2 g/10 min

Mechanical Properties

Tensile Strength:
30 ± 5 MPa

Breaking Elongation Rate:
14.8 ± 4.2 %

Bending Modulus:
2360 ± 250 MPa

Bending Strength:
53 ± 6 MPa

Impact Strength:
19.2 ± 3.7 kJ/m²


Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

What's in the Box?

Filament with Spool*1 & Desiccant*1

Filament Label*1


Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

2. If you don't have the spool model in your printer, please click here to download.

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki

Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!