Bambu Lab ABS-GF (1.75mm, 1kg)

High-Quality Filament for Your 3D printer


Product Features:

  • Enhanced Strength and Stiffness
  • Greater Dimensional Stability
  • Fine Matte Finish
  • Durability and Water Resistance
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm

Cautions for Use:

  • 0.2 mm Nozzle Not Compatible
  • Enclosure Printers Required
  • AMS & AMS lite Compatible

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

NOTE: Before printing, please kindly refer to the Printing Tips for optimal results.

29.99


Availability: In-Stock Now

Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping.

Bambu ABS-GF

Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.


Enhanced Strength and Stiffness

ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.

 

Greater Dimensional Stability

Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.

Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%


Fine Matte Finish

PThe seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.



Water Resistance & Built to Last


PLA Matte Hex Code Table

Color Hex Code Display

IWhite                                                        

#FFFFF                                                  

                                                                                           

Gray

#C6C6C6

                                                                                           

Yellow

#FFE133

                                                                                           

Orange

#F48438

                                                                                           

Red

#E83100

                                                                                           

Green

#61BF36

                                                                                           

Blue

#0C3B95

                                                                                           

Black

#000000

                                                                                           


RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.


Parameters Comparison

ABS ABS-GF PA6-GF

Composition

Acrylonitrile - butadiene - styrene

Acrylonitrile - butadiene - styrene, glass fiber

PA6, glass fiber

AMS Compatibility

YES

YES

YES

Dry Out Before Use

Recommended

Recommended

Required

Printing Speed

< 300 mm/s

< 180 mm/s

< 130 mm/s

Printer Type

Enclosure

Enclosure

Enclosure

Toughness (Impact Strength - XY)

39.3 kJ/m²

14.5 kJ/m²

27.2 kJ/m²

Strength (Bending Strength - XY)

62 MPa

68 MPa

120 MPa

Layer Strength (Bending Strength - Z)

39 MPa

46 MPa

51 MPa

Stiffness (Bending Modulus - XY)

1880 MPa

2860 MPa

3670 MPa

Layer Adhesion (Impact Strength - Z)

7.4 kJ/m²

5.3 kJ/m²

4.1 kJ/m²

Heat Resistance(HDT, 0.45 MPa)

87 °C

99 °C

182 °C

Saturated Water Absorption Rate/%(25 °C, 55% RH)

0.65

0.53

2.56


Accessory Compatibility

Recommended Not Recommended

Build Plate                      

Engineering Plate, High Temperature Plate or Textured PEI Plate

Cool Plate

Hotend

Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm

Hotend with Stainless Steel Nozzle (all size)
Hotend with Hardened Steel Nozzle (0.2 mm))

Glue

Bambu Liquid Glue / Glue Stick

/


Recommended Printing Settings


Drying Settings (Blast Drying Oven):
880 °C, 8 h

Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)

Nozzle Temperature:
240 - 270 °C

Bed Temperature (with Glue):
80 - 100 °C

Printing Speed:
< 180 mm/s

Physical Properties


Density:
1.08 g/cm³

Vicat Softening Temperature:
103 °C

Heat Deflection Temperature:
99 °C

Melting Temperature:
202 °C

Melt Index:
7.56 ± 1.4 g/10 min

Mechanical Properties


Tensile Strength:
36 ± 3 MPa

Breaking Elongation Rate:
6.3% ± 1.2%

Bending Modulus:
2860 ± 130 MPa

Bending Strength:
68 ± 4 MPa

Impact Strength:
14.5 ± 1.5 kJ/m²


Downloads


Printing Tips

• Drying conditions: 80℃ for 8 hrs. Dry the filament before printing to achieve higher print quality.

• To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing. Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.

• Similar to ABS, pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area and use enclosed printers.


What's in the Box?

Filament with Spool*1 & Desiccant*1

Filament Label*1

Package*1


Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!