3D Potter Auger System

By 3D Potter

3D Potter Auger System

By 3D Potter

This auger system allows you to have direct control over the flow rate of your 3D print. The auger can be directly controlled by the Scara Elite, the 10 XL, or a stand alone driver. You can easily change print speeds without having to worry about adjusting the extrusion rate. It can be hand fed, or fed directly by a pump

Our Auger works especially well with the new 3D Printing products from Sika Corporation. #752F

The color may vary.

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

7,920.00


Availability: In-Stock Now

This auger system allows you to have direct control over the flow rate of your 3D print. The auger can be directly controlled by the Scara Elite, the 10 XL, or a stand alone driver. Easily change print speeds without having to worry about adjusting the extrusion rate. It can be hand fed, or fed directly by a pump.

Our in-house testing shows material hardening within 6 to 10 seconds after leaving the nozzle. This opens up tremendous opportunities when you design objects with overhangs that would not be possible to print without the accelerator.

With the accelerator we are capable of printing large 8-10 ft objects with a small cross section non-stop.

Although this system will work with a variety of materials, there are some limitations. We recommend aggregate no larger than 1mm to 2mm. The material consistency also needs to be adjusted correctly. Avoid thick materials or materials that have high clay contact.

It is possible to print clay but the consistency needs to be relatively loose. With the clay at this consistency, it's not practical to print unless you plan on injecting some other chemical to solidified clay after printing.

Weight: 12lbs (5.4kg)
Size: ~14in diameter at the top, ~28in tall.
Attachment sleeve outside diameter: ~3.5in to ~4in, 5in tall.

Auger System package includes:

  • Top drive assembly with gearbox and motor
  • Auger screw assembly
  • 2 nozzles, 1/2 in and 3/4 in. 1 in opening with no nozzle

Beta Auger System: Basic Tutorial


3D Potter Auger System in Action


Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!