All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended | Not Recommended | |
Build Plate | Engineering Plate, High Temperature Plate or Textured PEI Plate | Cool Plate |
Hotend | All Size / Material | / |
Glue | Bambu Glue Stick | Bambu Liquid Glue |
Drying Settings (Blast Drying Oven):
80 °C,8h
Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature:
250 - 270 °C
Bed Temperature (with Glue):
90 - 110 °C
Printing Speed:
< 300 mm/s
Density:
1.20 g/cm³
Vicat Softening Temperature:
119 °C
Heat Deflection Temperature:
117 °C
Melting Temperature:
2228 °C
Melt Index:
32.2 ± 2.9 g/10 min
Tensile Strength:
55 ± 4 MPa
Breaking Elongation Rate:
3.8 ± 0.3 %
Bending Modulus:
2310 ± 70 MPa
Bending Strength:
108 ± 4 MPa
Impact Strength:
434.8 ± 2.1 kJ/m²
• Due to the transparent properties of the filament, Lidar Extrusion Calibration can be affected when printing Transparent PC.
• Bambu PC needs proper drying before printing, recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 100 ℃ for 12 hours on a printer's heatbed. For more details please refer to: Filament drying cover on WIKI.
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1
Instructions*1 & Spool Sticker*1
Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...
Join our mailing list to get the Deal of the Week along with other goodies.
You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.