Modifi3D 3D PRO Print Finishing Tool

Easily modify your 3D prints

Modifi3D 3D PRO Print Finishing Tool

Easily modify your 3D prints


31.99


Availability: In-Stock Now

Modifi3D PRO is an evolution of the 3D print tool. It is now tougher and has more power. We have added adjustable temperature control with an LCD display. Temperature can now be set up to 450ºC to allow for future potential of new tips and attachments. The PRO is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints, and comes with 10 interchangeable tips. The new improved tips are stronger than before and provide more functions including the ability to produce countersinks and setting threaded inserts.

Modifi3D PRO 3D Print Finishing Tool includes 10 interchangeable tips, temperature control, and an LCD display. Temp can now be set up to 450ºC to support future new tips and attachments. The PRO is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints, and includes tips for producing countersinks and setting threaded inserts.
Modifi3D 3D PRO Print Finishing Tool has a rating of 5.0 stars based on 2 reviews.

Overview

Introducing the Modifi3D 3D PRO Print Finishing Tool

Modifi3D PRO is an evolution of the 3D print tool. It is now tougher and has more power. We have added adjustable temperature control with an LCD display. Temperature can now be set up to 450ºC to allow for future potential of new tips and attachments.

The PRO is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints, and comes with 10 interchangeable tips. The new improved tips are stronger than before and provide more functions including the ability to produce countersinks and setting threaded inserts.


The Modifi3D PRO 3D Print Finishing Tool...
Now Tougher with More Power

The Modifi3D PRO includes the following features:

  • 10 interchangeable tips
  • Special tip coating to prevent sticking
  • Simple and easy to use
  • Rapid heat to 200ºC in under 25 secs
  • LCD Display
  • Adjustable temperature control
  • 30W power (450ºC Max Temp.)
  • 24V DC power supply (plugs into a wall outlet)
  • Adjustable Standby and Sleep modes
  • Basic stand included

 


How Modifi3D PRO Works

Modifi3D PRO is easy to use and takes away the frustration of finishing 3D prints. Simply plug in and it can be ready to use in 20-25 seconds.

The PRO also has options for standby and sleep modes if not being used (a basic stand is included but you can print your own PRO stand/tool holder with our downloadable 3D file).

Below are basic instructions (note that these are subject to change and full detailed instructions will be provided in the Modifi3D PRO box.


Getting Started

Getting started with the Modifi3D PRO is easy!

1. Select a tip and thread into the heater cover tube. Leave the heater cover tube and locking nut in place (this is only for rotational adjustment if required).
2. Place Modifi3D PRO on the included stand.
3. Plug into the Modifi3D PRO DC socket and plug in the wall adaptor.
4. When connected to power, the LCD display will show the version number for a few seconds and then switch to the actual temperature. Preset initial temperature is 300°C.


Interchangeable Tips and Maintenance

Improved strength and our special coating helps to prevent sticking.

1. To change tips unplug the DC power and allow the tips to cool.
2. Unscrew the existing tip from the end of the heater cover tube (leave the heater cover tube and locking nut in place)
3. Replace with your selected tip.
4. If you wish to rotate the tip, slightly loosen the locking nut and rotate the heater cover tube. Once at the correct angle simply tighten the locking nut.
5. Plug in the power supply.
Wipe tips before use to keep in good condition. Do not keep Modifi3D PRO switched on for extended periods of time as this will break down the special coating on the tips. Do not put excessive pressure on the tip during use to avoid damaging the tip or heater assembly. Let heat do the work. Never clean tips with coarse, abrasive materials.

The insert setting tip works with M3, M4, M5 and M6 threaded inserts. It is designed to fit the minor diameter of M3 and M5 but also functions with M4 and M6 due the flat surface on the tip steps.


Temperature Adjustment

LCD display and adjustable temperature control

  • To set the temperature press the +/- buttons until the desired temperature is selected.
  • After a few seconds the LCD display will show the actual temperature.
  • Temperature is adjusted in 1°C increments. To adjust in 10°C increments click the + or - a few times and then hold down.

HEATING NOTE:
The temperature shown on the LCD display is the temperature of the heater element. Due to different tip sizes and shapes heat transfer to the tip edge may vary slightly and hence actual tip temperature may also vary from that shown on the display.

The temperature shown on the LCD display is the temperature of the heater element. Due to different tip sizes and shapes heat transfer to the tip edge may vary slightly and hence actual tip temperature may also vary from that shown on the display.

 

 


Why Buy From 3D Universe?

Fast, Reliable Shipping

Most orders for in-stock items ship within one business day.

Secure Online Checkout

3D Universe accepts all major credit cards, as well as online payment methods like PayPal, Apple Pay, Amazon Pay, and Google Pay.

Purchase Orders Accepted

Purchase orders are accepted from qualifying organizations with Net 30 terms for orders of $200 or more. Email us for more information.

Excellent Customer Support

Call us at 800-689-4344 or email us if you need any assistance!


Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.