Phrozen Pro Series Protowhite Rigid 1KG

Produce in-house prototypes efficiently

Phrozen Pro Series Protowhite Rigid 1KG

Produce in-house prototypes efficiently


99.99


This product currently has a shipping lead time of about 3 weeks.

Empowered by one of the most prestigious chemical company BASF Forward AM , Phrozen Pro Series Protowhite Rigid Resin enables designers to conduct in-house prototypes efficiently before moving onto the manufacturing stage.

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

Empowered by one of the most prestigious chemical company BASF Forward AM , Phrozen Pro Series Protowhite Rigid Resin enables designers to conduct in-house prototypes efficiently before moving onto the manufacturing stage.

Overview

Phrozen Pro Series Protowhite Rigid 1KG

Empowered by one of the most prestigious chemical company BASF Forward AM , Phrozen Pro Series Protowhite Rigid Resin enables designers to conduct in-house prototypes efficiently before moving onto the manufacturing stage.

Post-processing note: For best results, please allow your print to dry for 40 to 60 minutes after wash, then postcure on both sides, 30 minutes per side.


Benefits

  • Rigid Resin Empowered by BASF Forward AM: Phrozen Protowhite Rigid Resin empowers industrial designers to solve design challenges and increase efficiency during the design validation phase by creating rigid and impact resistant 3D models.
  • Visualize Your Design Ideas With Ease: Turn conceptual ideas into complex 3D models to showcase small batches of high-quality prototypes for more efficient communication.
  • Best for Prototype Developments: Experiment and compare various 3D printed prototypes such as mechanical parts, jigs, fixtures, and glasses to refine design usability.
  • Save Time With Rapid Prototyping: Demonstrate 3D models and gather feedback from peers to identify improvements and reduce risks of design defects before going into full-scale production.

Operating Instructions

  • We suggest using resin and printer indoors under well-ventilated conditions.
  • Avoid exposure to sunlight and indoor luminescence.
  • Please preserve your resin in a closed opaque bottle to avoid exposure to air.
  • Do not mix used and non-used resin together.
  • Please keep the resin out of reach from children.
  • Do not dump resin. Please cure resin and treat/recycle it as general plastics garbage

Safety

  • Do not eat or swallow the resin.
  • Wear goggles to avoid eye contact with resin, if you have eye contact with resin, wash your eyes with water thoroughly.
  • Resin might cause slight irritation to skin. Wear gloves when handling. Stop using if an allergic reaction occurs.
  • Resin has a slight odor. We strongly suggest you use it under ventilated conditions.
  • Suggested safety equipment: gloves, mask, goggles, and lab coat.
  • Keep resin in room temperature (15 – 35 OC) and dry condition.

Specifications

Phrozen Pro Series Protowhite Rigid 1KG


Specifications

Density: 1.1 g / cm3
Viscosity 30°C: 220 mPas
E Modulus: 2300 MPa
Ultimate Tensile Strength: 57 MPa
Elongation at Break: 15 %

Flexural Modulus: 1920 MPa
Flexural Strength: 94 MPa
Charpy notched, 23 °C: 1.9 kJ/m²
HDT at 1.82 MPa: 49 °C
Surface Hardness, Shore D: 77 Shore D


Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!