Bambu Lab PLA Matte (1.75mm, 1kg) Refill
Request A Quote
To request a quote, please fill out the form below.
You can also call us at 800-689-4344 or email us at info@3duniverse.org.
Or fill out the form below, and we'll reach out within one business day.
Teachers, Educators, & Administrators
If you're part of an academic institution, we're committed to collaborating with you to arrange exclusive pricing and flexible payment options. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
State & Local Goverment Agencies
We offer special pricing for government agencies. 3D Universe is an authorized GSA contractor and has UEI, CAGE, and SAM codes available. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
Bambu Lab PLA Matte Refill
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate. | Engineering Plate |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid Glue or Glue Stick | / |
PLA Matte Hex Code Table
| Color | Hex Code | Display | |
| Ivory White |
|
| |
| Latte Brown |
|
| |
| Desert Tan |
|
| |
| Ash Gray |
|
| |
| Lilac Purple |
|
| |
| Sakura Pink |
|
| |
| Mandarin Orange |
|
| |
| Lemon Yellow |
|
| |
| Scarlet Red |
|
| |
| Dark Red |
|
| |
| Dark Brown |
|
| |
| Dark Green |
|
| |
| Grass Green |
|
| |
| Ice Blue |
|
| |
| Marine Blue |
|
| |
| Dark Blue |
|
| |
| Charcoal |
|
|
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
Drying Settings (Blast Drying Oven):
55 °C，8 h
Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature:
190 - 230 °C
Bed Temperature (with Glue):
35 - 45 °C
Printing Speed:
< 300 mm/s
Physical Properties
Density:
1.31 g/cm³
Vicat Softening Temperature:
63 °C
Heat Deflection Temperature:
58 °C
Melting Temperature:
163 °C
Melt Index:
39.4 ± 3.2 g/10 min
Mechanical Properties
Tensile Strength:
30 ± 5 MPa
Breaking Elongation Rate:
14.8 ± 4.2 %
Bending Modulus:
2360 ± 250 MPa
Bending Strength:
53 ± 6 MPa
Impact Strength:
19.2 ± 3.7 kJ/m²
Downloads
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
Print Your Own Spool Now
Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!
Instructions for Printed Spool
When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
