Request A Quote
To request a quote, please fill out the form below.
You can also call us at 800-689-4344 or email us at info@3duniverse.org.
Or fill out the form below, and we'll reach out within one business day.
Teachers, Educators, & Administrators
If you're part of an academic institution, we're committed to collaborating with you to arrange exclusive pricing and flexible payment options. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
State & Local Goverment Agencies
We offer special pricing for government agencies. 3D Universe is an authorized GSA contractor and has UEI, CAGE, and SAM codes available. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
Raise3D Draft Grey Resin
Benefits
- Fast printing speed
- High printing success rate
- Low viscosity
- Smooth surface
- Easy to clean
Applications
- Rapid prototypes validation
- High throughout parts
- Industrial design parts
- Art and sculpture display parts, etc
Material Properties*
*All test samples are printed on Raise3D DF2 printer (405nm wavelength, 2.3mW/cm², 200 μm layer thickness, exposure time 5 seconds) and cured for 10 minutes on the front and back of the sample with DF Cure.
See more details in Technical Data Sheet.
| Properties | Testing Method | Green | Post-Cured |
| Tensile Strength | ASTM D638 | 27.7 MPa | 56.5 MPa |
| Young’s Modulus | ASTM D638 | 0.95 GPa | 2.9 GPa |
| Elongation at Break | ASTM D638 | 16.7% | 8.31% |
| Flexural Strength | ASTM D790 | 61.2 MPa | 98.1 MPa |
| Flexural Modulus | ASTM D790 | 1.67 GPa | 3.3 GPa |
| Notched Izod | ASTM D256 | 18.0 J/m | 18.4 J/m |
| Heat Deflection Temp.@0.45 MPa | ASTM D648 | 49°C | 96°C |
Printing Settings
- Gently shake the resin bottle before printing to mix the resin evenly and then import it into the resin tank for printing, otherwise it will affect the appearance effect and material performance of the final printed part.
- It is recommended to use the default printing profiles available in ideaMaker.
- After printing, it’s recommended to not leave a successful but unwashed model in the printer for too long. This will prevent the model from over-swelling, which may cause dimensional deviations or support softening.
Cleaning
Draft Grey Resin requires cleaning to achieve the ideal properties of the printed part.
There is no need to remove support structures from the printed part, and the part should then be washed before post-curing, until the surface is free of any solvent residue.
For special structures or fine details, such as small holes, it’s recommended to clean manually, then blow dry the part with compressed air/nitrogen to remove residual solvent from the surface, or leave the part for a short time at room temperature to dry. Post-cure the model until the surface is free of any solvent residue.
Please refer to the chart on the right for the recommended washing parameters with Raise3D DF Wash
Recommended washing parameters:
Wash Time: 5 min
Wash Drying Time: 10 min
Post-curing
After cleaning, Draft Grey parts require post-curing to achieve optimal properties. Please refer to the chart on the right for the parameters with Raise3D DF Cure.
UV Curing Time : 20 min
Heat Curing Time: 0
Heat Curing Temperature: N/A
