The Virtual Foundry Stainless Steel 316L Filamet™ Print and Sinter Kit (2.85mm)

By The Virtual Foundry

The Virtual Foundry Stainless Steel 316L Filamet™ Print and Sinter Kit (2.85mm)

By The Virtual Foundry

399.03


Note: The Virtual Foundry products do not qualify for free shipping. A shipping fee will be calculated at checkout.


The Virtual Foundry Stainless Steel 316L Filamet™ Print and Sinter Kit is designed for quick metal printing success. What’s Included: 0.5kg spool of Stainless Steel 316L Filamet™ (2.85mm), Filawarmer, 300mL Alumina or 765mL Graphite Crucible, 1kg Steel Blend, 0.5kg Sintering Carbon.

NOTE: This material requires the use of a 0.6mm hardened steel nozzle (not included). UltiMaker 3D printer users should use a CC Print Core 0.6mm (sold separately).

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

The Virtual Foundry Stainless Steel 316L Filamet™ Print and Sinter Kit is designed for quick metal printing success. What’s Included: 0.5kg spool of Stainless Steel 316L Filamet™ (2.85mm), Filawarmer, 300mL Alumina or 765mL Graphite Crucible, 1kg Steel Blend, 0.5kg Sintering Carbon.

Stainless Steel 316L Filamet™ Print and Sinter Kit

The Stainless Steel 316L Filamet™ Print and Sinter Kit is designed for quick metal printing success.

What’s Included: 0.5kg spool of Stainless Steel 316L Filamet™ (2.85mm), Filawarmer, 300mL Alumina or 765mL Graphite Crucible, 1kg Steel Blend, 0.5kg Sintering Carbon.

NOTE: This material requires the use of a 0.6mm hardened steel nozzle (not included). UltiMaker 3D printer users should use a CC Print Core 0.6mm (sold separately).

Specs: The 0.5kg Stainless Steel 316L Filamet™ included in this kit contains 80.0% - 85.0% metal and has a density of 3.5g/cc.

High Compatibility: This Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Even works in 3D printing pens!

Easy to Print: All you need is an open architecture 3D printer, a 0.6mm hardened steel nozzle, a Filawarmer, and a model to print. Print like regular PLA. Place your spool so that the filament coming off is going straight into the extruder. The flow rate in your slicer may need to be adjusted up to 135%. Little to no warping occurs during printing.

Advanced Properties: Filamet™ is less hygroscopic than regular PLA. Filament dryers have adverse affects on Filamet™. Spools should not be dried.

Fully Sinterable Metal Filament: Once fired in a sintering furnace, the result is 100% metal. Instructions for sintering this product.

Special Qualities: Low carbon.

Used For: Partner Innovators have used this filament for aerospace and automotive research.

Crucible Specs: Alumina: 93mm D x 93mm H / Graphite: outside: 127mm D x 145mm H / inside: 127mm H x 102mm D

Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off metal part needs.

Note: All sales final except in cases of defective product.

Made In America


Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!