The Virtual Foundry Pyrex® (Borosilicate) Glass Filamet™ (1.75 mm)

By The Virtual Foundry

Note: The Virtual Foundry products do not qualify for free shipping. A shipping fee will be calculated at checkout.


The Virtual Foundry Pyrex® (Borosilicate) Glass Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Partner Innovators have used this filament for jigging apparatus for shape memory alloy development.

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

65.50


Availability: In-Stock Now

The Virtual Foundry Pyrex® (Borosilicate) Glass Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Partner Innovators have used this filament for jigging apparatus for shape memory alloy development.

Pyrex® (Borosilicate) Glass Filamet™


Pyrex® (Borosilicate) Filamet™ is available as 1.75mm and 2.85mm filament and as pellets.

Specs: This filament comes in 0.5kg and 1kg spools and 1kg bags of pellets. It contains 69.0% - 71.0% glass and has a density of 1.5g/cc.

High Compatibility: This Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce glass objects. Even works in 3D printing pens!

Easy to Print: All you need is an open architecture 3D printer, a 0.6mm hardened steel nozzle, and a model to print. Print like regular PLA. Place your spool so that the filament coming off is going straight into the extruder. The flow rate in your slicer may need to be adjusted up to 135%. Little to no warping occurs during printing.

Advanced Properties: Filamet™ is less hygroscopic than regular PLA. Filament dryers have adverse affects on Filamet™. Spools should not be dried.

Fully Sinterable Glass Filament: Once fired in a sintering furnace, the result is 100% glass. Instructions for sintering this product.

Special Qualities: Resistance to thermal shock.

Used For: Partner Innovators have used this filament for jigging apparatus for shape memory alloy development.

Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off glass part needs.

Note: All sales final except in cases of defective product.

Made In America


Material Load
By Mass

66.0 – 72.0%

Recommended Nozzle

0.6mm Hardened Steel

Sintering Temperature

843°C (1550°F)

Sintering Refractory

Density
(g/cc)

1.50

Filawarmer Recommended

No



Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!