The Virtual Foundry Filamet™ - 3D Metal Printing Evaluation Kit (1.75mm)
Request A Quote
To request a quote, please fill out the form below.
You can also call us at 800-689-4344 or email us at info@3duniverse.org.
Or fill out the form below, and we'll reach out within one business day.
Teachers, Educators, & Administrators
If you're part of an academic institution, we're committed to collaborating with you to arrange exclusive pricing and flexible payment options. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
State & Local Goverment Agencies
We offer special pricing for government agencies. 3D Universe is an authorized GSA contractor and has UEI, CAGE, and SAM codes available. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
3D Metal Printing Evaluation Kit
This Metal Printing Evaluation Kit comes with about 100g of Bronze Filamet™. With this kit, you can print and sinter the Universal Calibration Rings model twice. Includes sample green and sintered prints.
Specs: The Filament in this kit is available in 1.75mm only. It contains 88.0% - 90.0% metal and has a density of 4.29g/cc - 4.5g/cc.
High Compatibility: This Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Even works in 3D printing pens!
Easy to Print: All you need is an open architecture 3D printer, a 0.6mm hardened steel nozzle, and a model to print. Print like regular PLA. Place your spool so that the filament coming off is going straight into the extruder. The flow rate in your slicer may need to be adjusted up to 135%. Little to no warping occurs during printing.
Advanced Properties: Filamet™ is less hygroscopic than regular PLA. Filament dryers have adverse affects on Filamet™. Spools should not be dried.
Fully Sinterable Metal Filament: Once fired in a sintering furnace, the result is 100% metal. Instructions for sintering this product.
Sintering Refractories: Samples of Al2O3 and Magnesium Silicate are included in this kit to allow you to fully debind and sinter parts.
Oxygen Management: Samples of Sintering Carbon and Kiln Paper are included to keep oxygen away from your parts in the crucible. Simply add a thick layer of Sintering Carbon to the top of the crucible then lay a sheet of Kiln Paper over it to protect your part from oxygen as it sinters.
Crucible: Included with this kit is a 118mL Stainless Steel Crucible. Expected lifespan of Stainless Steel Crucibles is 3-4 cycles.
Special Qualities: Easiest material to print and sinter. Perfect material to begin with.
Metal Printing Evaluation Kit is Used For: Partner Innovators have used this filament for research.
Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off metal part needs.
Note: All sales final except in cases of defective product.
Made In America
