Taulman Filaments have a reputation for being cost-effective and suitable for real-world applications. Taulman's Bridge Nylon is a competitively priced filament for making highly durable 3D prints.
With the ability to withstand up to 4,800 PSI of Tensile Stress, your Bridge 3D Prints will be able to withstand a lot of punishment. This inherent toughness make it suitable for fabricating mechanical moving parts or load bearing structures. At 3D Universe, we've 3D printed entire prosthetic limbs using only Taulman's Bridge Nylon.
Bridge improves upon older Taulman Nylon filaments with both reduced shrinkage of prints, and reduced water uptake. Additionally, Taulman Bridge is slightly translucent, allowing for easier visual inspection of completed prints.
Important Note: Taulman Bridge is still measurably sensitive to moisture. If a spool has been left exposed for any period of time, it's been recommended to store it in an oven at 60C to 70C for up to 2 hours.
|Extruder Temperature||250C - 265C|
|Heated Print Bed Temperature||45C|
|Print Speed||80% of ABS speeds is recommended by Taulman, we recommend running print jobs even slightly slower|
|Retraction||1 mm for each 0.1 mm of nozzle width e.g. 0.4 mm nozzle = 4 mm retraction|
One of Bridge's advantages over other polymers is the ease of getting first layer adhesion. Simply coat the print bed with a thin layer of PVA glue formula or a glue stick.
Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...
Join our mailing list to get the Deal of the Week along with other goodies.
You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.