Kodak Nylon 6 is one of the toughest engineering plastics available. Build fixtures, guides, jigs, guards and other manufacturing aids that require good mechanical and tensile strength. Nylon 6 offers excellent resistance to heat, oils, solvents, and chemicals. Our Neon variety transmits ultraviolet/black light, so you can make objects that glow in the dark.
Do not use in direct contact with food.
Do not leave exposed to air, since it readily absorbs humidity, which can greatly affect your print. Drying this hygroscopic material before printing is highly recommended. The KODAK 3D Printing Filament airtight case (included with the Kodak Portrait 3D printer) will improve your printing experience by preventing exposure to dust and absorption of moisture during extrusion.
Print temperature: 240-270C
Print bed temperature: 90-110C (not glass)
Cooling fans: Off
Closed environment: Not required
Tips: keep the filament dry by properly storing the spool. It may require drying at 80°C for a few hours before printing for best results.
Important Note: Nylon is a challenging material to print. You may need to get a sheet of tufnol or garolite to print on to avoid warping.
+/- 0.02mm diameter
99% roundness accuracy
<0.02% moisture content
Density: 1.14 g/cm3 (Test method: ISO 1183/B)
Melting temperature (10°C/min): 192°C (Test method: ISO 11357-1/-3)
Kodak PLA+ is designed for printers that work with standard 2.85 mm and up to 3.00 mm size filaments with a heated bed. This includes, but is not limited to:
Note: Kodak 3D printing materials are manufactured by SMART International. The Kodak trademark, logo and trade dress are used under license by SMART International.
Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...
Join our mailing list to get the Deal of the Week along with other goodies.
You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.