The Virtual Foundry Titanium 64-5 Filamet™ (1.75 mm)

By The Virtual Foundry

Note: The Virtual Foundry products do not qualify for free shipping. A shipping fee will be calculated at checkout.


The Virtual Foundry Titanium 64-5 Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Partner Innovators have used this filament for Research into human body implants.

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

421.00


Availability: In-Stock Now

The Virtual Foundry Titanium 64-5 Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Partner Innovators have used this filament for Research into human body implants.

Titanium 64-5 Filamet™


Titanium 64-5 Filamet™ is available as 1.75mm and 2.85mm filament and as pellets.

Specs: This filament comes in 0.25kg and 0.5kg spools and 1kg bags of pellets. It contains 78.0% - 82.0% metal and has a density of 2.46g/cc.

High Compatibility: This Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Even works in 3D printing pens!

Easy to Print: All you need is an open architecture 3D printer, a 0.6mm hardened steel nozzle, a Filawarmer, and a model to print. Print like regular PLA. Place your spool so that the filament coming off is going straight into the extruder. The flow rate in your slicer may need to be adjusted up to 135%. Little to no warping occurs during printing.

Advanced Properties: Filamet™ is less hygroscopic than regular PLA. Filament dryers have adverse affects on Filamet™. Spools should not be dried.

Fully Sinterable Metal Filament: Once fired in a sintering furnace, the result is 100% metal. Sintering trials have not been conducted for this product.

Special Qualities: Light weight.

Used For: Partner Innovators have used this filament for Research into human body implants.

Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off metal part needs.

Note: All sales final except in cases of defective product.

Made In America


Material Load
By Mass

78.0 – 82.0%

Recommended Nozzle

0.6mm Hardened Steel

Sintering Temperature

1350°C (2462°F) Untested

Sintering Refractory

Untested

Density
(g/cc)

2.46

Filawarmer Recommended

Yes



Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. Check out our filament collection...

Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!