xTool Selected Air Compressor & Air Dryer
Request A Quote
To request a quote, please fill out the form below.
You can also call us at 800-689-4344 or email us at info@3duniverse.org.
Or fill out the form below, and we'll reach out within one business day.
Teachers, Educators, & Administrators
If you're part of an academic institution, we're committed to collaborating with you to arrange exclusive pricing and flexible payment options. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
State & Local Goverment Agencies
We offer special pricing for government agencies. 3D Universe is an authorized GSA contractor and has UEI, CAGE, and SAM codes available. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
Overview
xTool Air Compressor and Air Dryer for MetalFab
The Most Cost-Efficient Gas Solution for Burr-free Metal Cutting
**The air compressor and the air dryer must be used together.
Save $20,000+/year
Than Gas Cylinders
A single 40L nitrogen cylinder lasts just 30 minutes, costing over $20K annually for continuous metalcutting. So why not switch to xTool SaveGas™ solution and stop wasting money on gas tanks? No more nitrogen, argon or oxygen refills. Invest once, cut forever.
xTool SaveGasâ„¢ Nozzle
50% Gas Savings, Cut Costs Now!
xTool self-developed SaveGas™ cutting nozzle features a unique telescopic design that minimizes gas leakage and concentrates airflow for precise cuts. You only need 87 PSI of air pressure to achieve cutting results comparable to 174 PSI of nitrogen-cutting your gas costs to the lowest!
Cut 4mm Metal Like Butter
Achieve perfect cuts in thick metals with 87 PSI air pressure—whether it’s 4 mm stainless steel, 4 mm aluminum, or 3 mm brass—using only xTool SaveGas™ nozzle, Air Compressor and Air Dryer!
HyperPureâ„¢ Filtration System
xTool Ary Dryer applies a triple-stage industrial-grade filter that removes 99% of moisture, impurities, and oil to guarantee ultra-clean, dry air for peak cutting performance!
Space-saving Design Fits Your Studio
Nobody offers such a compact yet powerful air system for metal cutting! At just 0.066 m³ in size—providing equal performance but smaller than industrial units and more convenient than gas cylinders. You can lift it easily with one hand!
45s Air Generation, Non-stop Cut
Powered by a 2,200W motor and a 20L gas tank, xTool Air Compressor delivers stable, continuous air pressure over 87 PSI(0.6MPa), achieving non-stop cuts. It recovers from 0 PSI to 145 PSI in just 45 seconds, enhancing your metalwork efficiency.
Quality Guaranteed, Built to Last
xTool Air Compressor and Air Dryer can operate reliably for 2,400 hours even in environments ranging from -10℃ to 40℃, leading to a longlasting use.
In the Box
Specifications
| Key Information | xTool Selected Air Compressor |
| Max. Air Pressure | 145 PSI (1.0 MPa) |
| Working Air Pressure | 87 PSI to 114 PSI (0.6 MPa ~ 0.79 MPa) |
| Max. Air Flow | 12.4 SCFM (350 L/min) |
| Tank Capacity | 5.3 Gallon (20L) |
| Rated Power | 3.0 HP (2200 W) |
| Recovery Time | 45s from 0 to 145 PSI (0~1.0 MPa) |
| Product Dimensions | 18.11'' × 20.87'' × 10.63'' (460 mm × 530 mm × 270 mm) |
| Product Weight | 35.27 lbs (16 kg) |
| Operating Voltage | 220 V |
| Pipe Diameter | 0.39'' (10 mm) |
| Working Temperature
| 14 °F to 104 °F (-10 ℃ ~ 40 ℃)
|
| Key Information | xTool Selected Air Dryer |
| Filtration Efficiency | 99% moisture drying, 99.999% oil/rust removal |
| Max. Allowable Airflow | 14.1 CFM (400L/min) |
| Max. Allowable Air Pressure | 181 PSI (1.25 MPa) |
| Dew Point | 36 ℉~50 ℉ (2 ℃~10 ℃) |
| Air Inlet Temperature | ≤113 ℉ (45 ℃) |
| Rated Power | 0.51 HP (380 W) |
| Product Dimensions | 15.83'' × 13.98'' × 8.94'' (402 mm × 355 mm × 227 mm) |
| Product Weight | 23.81 lbs (10.8 kg) |
| Operating Voltage / Current | US: 110V, 4.8 A |
| Pipe Diameter | 0.39'' (10 mm) |
| Working Temperature | 14 °F to 104 °F (-10 ℃ ~ 40 ℃) |
FAQs
Can I use the air compressor separately?
No, the air compressor and air dryer must be used together. Otherwise, compressed air containing moisture, oil, and dust will enter the welding gun and air lines, which will not only degrade cutting performance but also damage the equipment.
So now we don't offer an option of purchasing xTool air compressor separately.
Can I use the xTool air dryer with my own air compressor?
Yes, but the air compressor should meet strict requirements:
To achieve best cutting eeffcts, xTool air dryer should be used with an air compressor that has a rated pressure over 145 PSI (1.0MPa), air flow over 7CFM@87PSI (200L/min@0.6MPa) when using the xTool SaveGas nozzle.
Also, the air flow that goes into the air dryer should be lower than 14.1 CFM (400L/min), the air pressure should be lower than 181 PSI (1.25MPa), the air temperature should be lower than 122℉ ( 50℃). Otherwise, it will cause damage to the air dryer and bad cutting effects.
What metals can be cut using xTool's air compressor and refrigerated dryer?
The maximum air pressure output of xTool air compressor is 1.0MPa, stably providing over 0.6MPa during cutting.
When paired with xTool SaveGas™ Nozzle, it can cut up to 4mm stainless steel, 4mm aluminum, 3mm brass, 1mm carbon steel (ordinary nozzle), and 1mm galvanized steel (ordinary nozzle) with no burrs.
For thicker stainless steel, it is recommended to use nitrogen, argon, or an air compressor with a pressure above 1.2MPa.
For thicker carbon steel, oxygen cutting is advised.
How do xTool air compressor and air dryer differ from other brands?
xTool air compressor is compact yet delivers powerful performance, equipped with a 5.2HP high-power motor that provides up to 1.0MPa pressure and 14.1 CFM airflow, specifically designed for metal cutting.
xTool air dryer features a unique heat exchange module to rapidly cool compressed air and a three-stage precision filter system that removes 99.999% of oil and dust.
Compared to other dryers with only 1 or 2 filtration stages, xTool's filtration efficiency is significantly improved, ensuring longer lifespan and superior cutting results.
How does an air compressor differ from nitrogen or argon gas?
Lower cost: Nitrogen/argon cylinders are expensive. For example, a 40L nitrogen cylinder at 1.2MPa lasts only ~30 minutes, requiring frequent replacements. In contrast, an air compressor uses free ambient air and only consumes electricity, saving up to $20,000 annually.
Better performance for stainless steel: At the same settings, compressed air achieves burr-free cuts on thicker stainless steel at lower pressures. While compressed air contains oxygen, causing oxidation and darkened cut surfaces. Nitrogen delivers oxidation-free, bright white finishes.
Important Note: xTool SaveGas™ Nozzle will cause surface scratches and cannot cut intricate patterns smaller than 2.5mm. If high cutting quality and pattern precision are required, it is recommended to use ordinary nozzles and high pressure over 1.2 MPa (compressed air or nitrogen/argon).
