Taulman's innovative TECH-G 3D Printing Filament is a PETG that overcomes the strength limitations of PLA nad ABS, with 5,900 PSI of tensile strength. Additionally, its elongation is limited to 3%, which means greatly reduced deformation under severe structural stress. Lastly, TECH-G slightly transparent, which is often helpful when inspecting the inner structure of completed prints.

Printing instructions:

• Recommended Nozzle Temperature: 238°C
• Heated-bed Temperature: 72°C
• First layer coating: 50% PVA-based glue, 50% water
• Use lower fan settings