* * * Holiday Sales Now In Effect! * * * Visit Our Sales Page * * *
*** Holiday Sales Now In Effect! *** Visit Our Sales Page
Magigoo 3D Printing Adhesives offer a great way for ensuring your prints stick perfectly to the build plate, even when printing with more challenging materials like nylon, polypropylene, or polycarbonate.
See below for the different Magigoo varieties available. If you like to experiment with different materials, the Magigoo Pro Kit is for you!
Magigoo is an easy-to-use 3D printing adhesive designed to provide excellent print bed adhesion for a variety of 3D printing materials. Apply Magigoo to your unheated print bed. When the print is finished, wait for the plate to cool down and your prints will pop right off the bed! Magigoo also helps to prevent warping, even with more challenging materials like ABS and ASA.
Key features include:
Magigoo PA is designed for professional use, to work exclusively with Polyamide (nylon) filaments. Parts will be relatively easy to remove once the print bed cools. Magigoo residue can be easily cleaned off using a wet cloth.
Nylon filaments prove to be challenging materials for FDM printing due to their lower adhesion to conventional 3D printing build surfaces and their higher tendency to warp. Furthermore, there are several classes of PA filaments, each behaving differently. Magigoo PA is a specialized solution for FDM printing of PA filaments which was developed to work with a wide number of PA types.
Magigoo PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
Polypropylene is an especially challenging 3D printing material due to its tendency to warp. It normally requires using special adhesion sheets or a layer of clear packing tape applied to the print bed.
Magigoo PP eliminates the need for adhesion sheets or clear packing tape when using polypropylene filament. Parts are relatively easy to remove once the print bed cools, and the Magigoo residue can be easily cleaned off if the included procedure is followed. (See "How to Use Magigoo Adhesives" section below)
Magigoo PP-GF is designed to work exclusively with glass reinforced polypropylene (PP-GF) filaments. This adhesive makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools.
Magigoo PP-GF has been designed and tested to work with 30% glass fiber filled Polypropylene.
If you love to print with engineering filaments, the Magigoo Pro-Kit is for you! This kit includes the following:
Magigoo adhesives are designed for professional use to work exclusively with engineering filaments. These adhesives make sure prints stick firmly when the print-bed is hot and that parts are easy to remove once the bed cools.
When doing larger printer using materials that have a tendency to warp (i.e. ABS, nylon, polycarbonate, polypropylene, etc.), a 20 mm brim is recommended. In cases of excess adhesion, it is recommended to wet the print bed with a small amount of water and slowly work it below the part. This should make part removal easier.
Important Note: The Magigoo applicator has an active spring valve, which activates when applicator is pressed against the build plate. Please do not squeeze the bottle when the applicator is not activated. Otherwise, the applicator may pop off. Bottle may be slightly squeezed, only when the nib is pressed against the bed and it may be necessary only if a greater rate of flow is required. Bottle must not be squeezed when cap is off at any other time, as it may result in glue popping out of the bottle.
Cleaning Instructions for Magigoo PP: Use a wet hard sponge to remove all glue residue. Once the glue layer is wet, it will form a white layer which can be easily scrubbed off with an abrasive sponge. Once the layer is completely loose from the glass it can be wiped away with a wet cloth and ﬁnally cleaned with a dry paper towel.
Nothing will impact your 3D printing results like the kind of filament you use.
Good filament is highly consistent in diameter, is wound evenly onto the spool
with just the right amount of tension, and will not tangle when being unwound.
3D Universe offers a wide range of high-quality filaments to choose from.
We provide a 100% satisfaction guarantee on all filament we sell. If
you have any problems, just send back the unused portion of the spool for a full refund.
Check out our filament collection...
Join our mailing list and receive at most *one* very useful email per week.
Hate SPAM? We do too! We're down with GDPR, and respect the privacy of our subscribers.
Join our mailing list to get the Deal of the Week along with other goodies.
You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.