LulzBot TAZ Dual Extruder v3 Tool Head

Unleash dual extrusion 3D printing on your LulzBot TAZ

By LulzBot

LulzBot TAZ Dual Extruder v3 Tool Head

Unleash dual extrusion 3D printing on your LulzBot TAZ

By LulzBot

Sold Out ($ 495.00)

Experience full geometric freedom
Works with LulzBot TAZ 6, LulzBot TAZ 5
Lighter weight, better cooling than V2
USA orders only. No international shipping.

Product Features

The Dual Extruder v3 does not require nozzle leveling or offset calibration, is lighter and more compact than its predecessor, and features improved heat sink and part cooling. With hassle-free hardware, integrated software, and water-soluble support material, who knew geometric freedom could be this easy?

The LulzBot TAZ Dual Extruder v3 was engineered with a focus on printing with dedicated support materials. The Dual Extruder v3 enables 3D printing complex geometry that previously would have required time spent removing same-material supports with a risk of breaking your print and almost always leaving evidence of the support in imperfect bottom surfaces. With water-soluble supports like PVA, let the water do the work and enjoy clean and accurate bottom surfaces.

The Dual Extruder v3 features a unibody heatsink with two hot ends co-developed with E3D, makers of the ever popular line of all-metal hot ends. The precision-machined design brings the hot ends closer together, resulting in a dual extruder with no need for nozzle leveling or offset calibration. Just install the tool head and accessories, quickly flash firmware with Cura LulzBot Edition, and start printing.

The Dual Extruder v3 comes with everything you need to install on your LulzBot TAZ 6, including an extra wide wiper pad mount that enables your Dual Extruder v3 to work flawlessly with LulzBot self-cleaning and self-leveling technology.

Parts & Specifications

Parts Included

(1) LulzBot TAZ Dual Extruder Tool Head v3 (Fully Assembled)
(1) 3D Printed Z-axis endstop extension mount (for TAZ 6)
(1) Machined Z-axis endstop extension (for TAZ 6)

Note: The Z-axis Toggle Extension and Mount should only be used on a TAZ 6 with the Dual Extruder v3 Tool Head. Leaving this extension on the printer and using it with other tool heads will cause failed probes due to the higher registered minimum position.

(1) Dual v3 wiper mount
(1) Additional spool arm
(1) Feed tube spinner
(1) T-nut holder jig
(1) Idler jig
(4) Wire tie
(4) 3D printed low profile bed corners (For TAZ 5)
(2) Extension harnesses
(1) M5 washer (Black)
(1) M5 x 14 socket head cap screw
(1) Filament Feed tube
(1) Sample length of Polylite PLA
(1) Sample length of PolyDissolve S1


  • Required filament diameter: 2.85mm diameter
  • Hot end temperature range: 120¬∞C - 300¬∞C
  • Nozzle diameters: 0.5mm
  • Required power system: 24 Volts
  • Fans: Two 24v 40mm axial fans for extrusion cooling, one 5v 40mm axial fan for heat-sink cooling
  • Weight: 0.96 kg (2.11 lbs)

Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.