Kodak Nylon 12 Filament 1.75mm - 750g

Ideal material for durable parts


77.99

Availability: In-Stock Now

Kodak Nylon 12 is an ideal material for durable parts and is the best choice for printing high-stress working mechanisms. It is much less hygroscopic than Nylon 6 and extremely stable both thermally and chemically. It shows excellent physical properties, such as flexibility in thin walls and superior mechanical resistance.

Introducing Kodak Nylon 12 Filament

Kodak Nylon 12 is an ideal material for durable parts and is the best choice for printing high-stress working mechanisms. It is much less hygroscopic than Nylon 6 and extremely stable both thermally and chemically. It shows excellent physical properties, such as flexibility in thin walls and superior mechanical resistance.

Do not use in direct contact with food.

Benefits

  • Extremely tough with superior tensile strength, elongation at break and impact strength, high fatigue endurance and low friction coefficient
  • Very low warping and moisture absorption before and after printing
  • Superior chemical, UV and heat resistance (over 120°C)

Recommended Print Settings

Print temperature: 255-275C
Print bed temperature: 90-110C
Cooling fans: Off
Closed environment: Recommended

Important Note: Nylon is a challenging material to print. You may need to get a sheet of tufnol or garolite to print on to avoid warping.

Tolerance

 +/- 0.02mm diameter
99% roundness accuracy
<0.02% moisture content

Physical Properties

Density: 1.01 g/cm3 (Test method: ISO 1183/B)
Melting temperature (10°C/min): 178°C (Test method: ISO 11357-1/-3)

Works With 3D Printers That Accept 2.85 mm or 3.0 mm

Kodak PLA+ is designed for printers that work with standard 2.85 mm and up to 3.00 mm size filaments with a heated bed. This includes, but is not limited to:

 

Note: Kodak 3D printing materials are manufactured by SMART International. The Kodak trademark, logo and trade dress are used under license by SMART International.

Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.