FormFutura Volcano PLA Industrial Grade PLA 3D Printer Filament (1.75mm, 750g)
Volcano PLA is an industrial grade PLA 3D printer filament that is engineered for high 3D printing speeds, high heat resistance, high impact strength, with mechanical properties similar to ABS.
NOTE: 3D Universe is authorized to sell this product in the United States of America, only.
Request A Quote
To request a quote, add everything you need to your cart, head to the cart page, and click the "Request a Quote for Items in Cart" button.
You can also call us at 800-689-4344 or email us at info@3duniverse.org.
Or fill out the form below, and we'll reach out within one business day.
Teachers, Educators, & Administrators
If you're part of an academic institution, we're committed to collaborating with you to arrange exclusive pricing and flexible payment options. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
State & Local Goverment Agencies
We offer special pricing for government agencies. 3D Universe is an authorized GSA contractor and has UEI, CAGE, and SAM codes available. Simply request a quote using the form below to get started, and when you're ready to order, we'll provide Net 30 payment terms for qualifying organizations.
FormFutura Volcano PLA Industrial Grade PLA
Volcano PLA is an industrial grade PLA 3D printer filament that is engineered for high 3D printing speeds, high heat resistance, high impact strength, with mechanical properties similar to ABS.
Engineered for professional applications that require high printing speeds and improved heat resistance with mechanical properties similar to ABS. Volcano PLA offers the same mechanical and thermal properties - after annealing - as most ABS filaments, but with the biodegradability and ease of printing of PLA. Volcano PLA combines a high heat resistance with high printing speeds and high impact resistance into a PLA-based filament engineered for industrial applications.
Unique features
- High heat resistance of ≥ 95° C after annealing
- Less than 0.3% shrinkage after annealing
- Roughly 8 times less shrinkage compared to competitor materials available on the market
- Engineered to have excellent dimensional accuracy before and after annealing
- Engineered for high printing speeds of > 120mm/s
- Highly crystalline immediately after extruding resulting in increased stiffness and temperature resistance
- Superb mechanical properties comparable to ABS
- Excellent interlayer adhesion
- Biodegradable
- Matte surface finish
Annealing Volcano PLA
Annealing is a secondary process in which a plastic part is heated up to half of the melt temperature for a moderate period of time before letting the plastic part cool back down to room temperature. When the plastic part is reheated (annealed) like this, the material relaxes and internal stresses and/or strains are relieved resulting in improved dimensional stability, reduction/removal of dimensional distortion and defects, and improved physical and thermal properties of the printed (and annealed) plastic object.
Step 1
Preheat a convection oven at 110° C (half the melting temperature of Volcano PLA). It is highly recommended to use a thermometer to calibrate the exact temperature of your convection oven.
Preheating the oven to 110° C is extremely important as your Volcano PLA printed object will then crystalize in such a rapid timeframe that there is almost no time for the material to shrink. This results in a negligible shrinkage percentage of < 0.3% and by that Volcano PLA is unsurpassed when it comes to reduction of shrinkage after annealing.
Step 2
When the oven is preheated to a stable temperature of 110° C then quickly put your Volcano PLA printed object in the oven. Make sure to do this as quick as possible in order to keep the loss of heat reduced to a minimum. Don’t remove any supports (if used) from the printed object when putting it in the oven.
It is recommended to place the Volcano PLA printed object on a flat aluminium sheet/foil or similar flat metal object to obtain a stable/equal heat transmission.
Small objects – 20 minute timer
For small objects with thin walls and medium infill annealing will take ± 20 minutes
Large objects – 60 minute timer
For large objects with thick walls and medium/high infill annealing take ± 60 minutes
Step 3
When the object is annealed taking above mentioned duration into account then switch off the oven and let it cool down to room temperature. Do not remove the object before the oven has completely cooled down to room temperature!
Step 4
When the oven is cooled down completely you remove the object from the oven and remove any support material (if used). Your Volcano PLA printed object is now annealed and has all thermal and mechanical properties as displayed in the Technical Data Sheet (TDS).
More Information
Title FormFutura Volcano PLA Industrial Grade PLA 3D Printer Filament
Manufacturer FormFutura
Base Material PLA
Difficulty Easy
Nozzle Temperature 230℃ - 265℃
Heated Bed Required? No
Print Bed Temperature 0°C - 65°C (if available)
Bed Adhesion Glass Plate, Kapton tape, PET tape, Buildtak
Enclosure Required? No
Nozzle Size ≥ 0.15mm
Print Speed High
Fan Speed 50 - 100%
Flow Rate 95 - 110%
Retraction ± 5mm
Spool Weight 750g
Drying Optional
Minimum Nozzle Temp 230℃
CA Prop 65 Y
Dimensional Accuracy < +/- 0.05mm
Other Recommendations Volcano PLA offers the same mechanical and thermal properties - after annealing - as most ABS filaments
Settings Note: The settings above are meant as a guide to find your optimal print settings. They should work well for most printers, but every printer is different. Please feel free to experiment outside these ranges if you think it is suitable for your printer.
