FormFutura LUVOCOM 3F Carbon Fibre PEEK 9676 3D Printer Filament (1.75mm, 500g, Black)


Sold Out ($339.99)


FormFutura Luvocom 3F PEEK CF 9676 is a carbon-fiber-reinforced PEEK (Polyether Ether Ketone) 3D printer filament that has outstanding mechanical properties combined with excellent thermal and chemical resistance properties.

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

FormFutura Luvocom 3F PEEK CF 9676 is a carbon-fiber-reinforced PEEK (Polyether Ether Ketone) 3D printer filament that has outstanding mechanical properties combined with excellent thermal and chemical resistance properties.

FormFutura LUVOCOM 3F Carbon Fibre PEEK 9676

FormFutura Luvocom 3F PEEK CF 9676 is a carbon-fiber reinforced PEEK (Polyether Ether Ketone) 3D printer filament that has outstanding mechanical properties combined with excellent thermal and chemical resistance properties. The carbon fibers inside Luvocom 3F PEEK CF 9676 filament significantly improve the stiffness and compressive strength propterties of 3D printed parts. Parts that are 3D printed with Luvocom 3F PEEK CF 9676 filament are suitable for use in applications that will be exposed to short term service temperatures of up to 280°C and continious service temperatures up to 250°C.

Luvocom 3F PEEK CF 9676 is a 3D printer filament that is capable to 3D print parts that can replace metal and composite parts used in various industries. This carbon fiber reinforced PEEK filament unlocks industrial 3D printing applications in various industries, such as aerospace, medical, oil & gas, energy, marine, and automotive. Luvocom 3F PEEK CF 9676 filament is suitable for 3D printing dynamically-stressed parts, chemically- and hydrolytically- resistant parts, non-flammable parts and applications which require inherent flame resistance with low smoke and low toxic gas emissions.

 Key features

  • Lehvoss Luvocom 3F PEEK CF 9676 BK inside
  • Suitable for applications with a continuous service temperature of 250°C
  • Short term service temperature of 280°C (during lifetime max. 200h)
  • Heat deflection temperature of 280°C
  • Very high strength and stiffness (also in Z-direction)
  • Excellent mechanical properties
  • Non flammable
  • Exceptional chemical resistance properties

Applications

  • Dynamically-stressed parts
  • Highly chemically-resistant parts
  • Hydrolytically- resistant parts
  • Aerospace applications
  • Automotive

Abrasiveness

Please be aware that LUVOCOM 3F PEEK CF 9676 BK filaments contain a relatively high concentration of extremely hard carbon fibres, which have an abrasive nature. In general these carbon fibres will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.


More Information

Title   FormFutura LUVOCOM 3F Carbon Fibre PEEK 9676 Black 3D Printer Filament 500g
Manufacturer   FormFutura
Base Material   Carbon Fibre PEEK
Difficulty   Advanced
Nozzle Temperature   400°C - 450°C
Heated Bed Required?   Yes
Print Bed Temperature   ≥120ºC
Bed Adhesion   EasyFix Nr. VII
Enclosure Required?   90°C heated chamber
Nozzle Size   ≥ 0.4mm
Fan Speed   0 - 25%
Spool Weight   500g
Drying   +4 hours at max.110°C
Minimum Nozzle Temp   400°C
Dimensional Accuracy   < +/- 0.05mm

Settings Note:   The settings above are meant as a guide to find your optimal print settings. They should work well for most printers, but every printer is different. Please feel free to experiment outside these ranges if you think it is suitable for your printer.


Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

FormFutura LUVOCOM 3F Carbon Fibre PEEK 9676

FormFutura Luvocom 3F PEEK CF 9676 is a carbon-fiber reinforced PEEK (Polyether Ether Ketone) 3D printer filament that has outstanding mechanical properties combined with excellent thermal and chemical resistance properties. The carbon fibers inside Luvocom 3F PEEK CF 9676 filament significantly improve the stiffness and compressive strength propterties of 3D printed parts. Parts that are 3D printed with Luvocom 3F PEEK CF 9676 filament are suitable for use in applications that will be exposed to short term service temperatures of up to 280°C and continious service temperatures up to 250°C.

Luvocom 3F PEEK CF 9676 is a 3D printer filament that is capable to 3D print parts that can replace metal and composite parts used in various industries. This carbon fiber reinforced PEEK filament unlocks industrial 3D printing applications in various industries, such as aerospace, medical, oil & gas, energy, marine, and automotive. Luvocom 3F PEEK CF 9676 filament is suitable for 3D printing dynamically-stressed parts, chemically- and hydrolytically- resistant parts, non-flammable parts and applications which require inherent flame resistance with low smoke and low toxic gas emissions.

 Key features

  • Lehvoss Luvocom 3F PEEK CF 9676 BK inside
  • Suitable for applications with a continuous service temperature of 250°C
  • Short term service temperature of 280°C (during lifetime max. 200h)
  • Heat deflection temperature of 280°C
  • Very high strength and stiffness (also in Z-direction)
  • Excellent mechanical properties
  • Non flammable
  • Exceptional chemical resistance properties

Applications

  • Dynamically-stressed parts
  • Highly chemically-resistant parts
  • Hydrolytically- resistant parts
  • Aerospace applications
  • Automotive

Abrasiveness

Please be aware that LUVOCOM 3F PEEK CF 9676 BK filaments contain a relatively high concentration of extremely hard carbon fibres, which have an abrasive nature. In general these carbon fibres will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.


More Information

Title   FormFutura LUVOCOM 3F Carbon Fibre PEEK 9676 Black 3D Printer Filament 500g
Manufacturer   FormFutura
Base Material   Carbon Fibre PEEK
Difficulty   Advanced
Nozzle Temperature   400°C - 450°C
Heated Bed Required?   Yes
Print Bed Temperature   ≥120ºC
Bed Adhesion   EasyFix Nr. VII
Enclosure Required?   90°C heated chamber
Nozzle Size   ≥ 0.4mm
Fan Speed   0 - 25%
Spool Weight   500g
Drying   +4 hours at max.110°C
Minimum Nozzle Temp   400°C
Dimensional Accuracy   < +/- 0.05mm

Settings Note:   The settings above are meant as a guide to find your optimal print settings. They should work well for most printers, but every printer is different. Please feel free to experiment outside these ranges if you think it is suitable for your printer.


Save More on 3D Printer Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.

Subscribe Today!