{"product_id":"bambu-lab-h3c-9-material-tool-changer-3d-printer","title":"Bambu Lab H3C: 9-Material Tool Changer 3D Printer","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-hero.jpg\" alt=\"Bambu Lab H3C tool changer 3D printer with AMS 3H\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bambu Lab H3C is a nine-tool, fully enclosed tool changer. Every material sits in its own pre-heated PrintTool, so a print can switch between nine filaments, or between a fine nozzle and a fast one, in about six seconds. There's no purge tower to speak of and no waiting for a single hotend to heat up and cool down. The AMS 3H filament system, dryer and all nine spools live inside the machine, so it takes the same desk space as a single-nozzle printer.\u003c\/p\u003e\n\n\u003ch2\u003eSwapTek™: nine tools, six-second switches\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-swaptek-nine-tools.jpg\" alt=\"The H3C's nine docked PrintTools\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach of the nine PrintTools has its own filament path and heating system. Every material stays loaded, pre-heated and ready, so changing material takes six seconds instead of minutes, with far less waste than a single-nozzle multi-color printer.\u003c\/p\u003e\n\n\u003ch2\u003eFlexFeed: soft TPU at up to 3× the flow\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-flexfeed-tpu.jpg\" alt=\"FlexFeed with 1.75 mm and 2.85 mm filament and a TPU 75A shoe sole\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe H3C runs both 1.75 mm and 2.85 mm filament (2.85 mm through the bypass feed) and switches between them on the fly. Thicker 2.85 mm TPU stays stiff under pressure, so TPU as soft as 75A prints reliably at up to three times the flow rate of a standard 1.75 mm setup. That makes it practical for soles, grips, gaskets and wearables.\u003c\/p\u003e\n\n\u003ch2\u003eMixed nozzles: detail and speed in the same print\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-mixed-nozzles-watch.jpg\" alt=\"A watch printed with a 0.2 mm nozzle for the dial and 0.4 mm for the case and TPU band\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eOn a single-nozzle printer you choose between a 0.2 mm nozzle for detail or a 0.4 mm nozzle for speed. With nine tools you don't have to: use a larger nozzle for the bulk of the part and a fine one only where detail matters. The H3C supports 0.2, 0.4, 0.6 and 0.8 mm hardened-steel nozzles.\u003c\/p\u003e\n\n\u003ch2\u003eAMS 3H: filament handling built for a tool changer\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-ams3h-auto-load.jpg\" alt=\"AMS 3H automatically loading filament into nine slots\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePush it in. That's it.\u003c\/strong\u003e Insert filament into any of the nine slots, and the AMS 3H detects it, routes it and loads it into the PrintTool on its own. RFID reads Bambu Lab spools automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-ams3h-dryer.jpg\" alt=\"The AMS 3H built-in filament dryer\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDries while you print.\u003c\/strong\u003e A two-slot dryer in the filament bay heats to 85 °C, hot enough for PA, PC and carbon-fiber-filled engineering materials. The sealed bay actively removes moisture and shows temperature and humidity on the printer, in Bambu Studio and in Bambu Handy.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-all-inside-footprint.jpg\" alt=\"H3C footprint compared with tool changers that hang spools off the side\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNine materials, one footprint.\u003c\/strong\u003e Most multi-material setups end up with spools hanging off the sides and a dryer on the bench. The H3C keeps everything inside, in the footprint of a single-nozzle machine.\u003c\/p\u003e\n\n\u003ch2\u003eFlagship performance, easy to run\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-lighter-toolhead.jpg\" alt=\"The H3C's lighter toolhead and X-axis\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLighter head, faster prints.\u003c\/strong\u003e A 40% lighter toolhead and X-axis assembly reach 25,000 mm\/s² acceleration and 1,400 mm\/s travel without ringing. Bambu Lab says prints finish over 10% faster.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-auto-calibration.jpg\" alt=\"Automatic calibration of all nine PrintTools\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNine tools, aligned every time.\u003c\/strong\u003e Before every print, the H3C calibrates docking, tool offsets and bed leveling for all nine PrintTools, so there's nothing to tune by hand.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-hms-miniwiki.jpg\" alt=\"HMS and MiniWiki troubleshooting on the printer screen\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fix, on screen.\u003c\/strong\u003e The Health Management System names the cause of a problem in plain language instead of an error code, and MiniWiki walks you through the fix step by step on the printer's touchscreen.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you can make\u003c\/h2\u003e\n\u003cp\u003eExamples from Bambu Lab and MakerWorld creators:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-showcase-floral-frame.jpg\" alt=\"Floral photo frame printed with CMYKW color mixing\" style=\"width:49%;height:auto;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-showcase-gather-bag.jpg\" alt=\"Multi-color TPU gather bag\" style=\"width:49%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-showcase-trainer.jpg\" alt=\"Multi-material flexible trainer shoe\" style=\"width:32%;height:auto;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-showcase-maker-watch.jpg\" alt=\"Maker Watch printed with mixed nozzle sizes\" style=\"width:32%;height:auto;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/h3c-showcase-dragon-bust.jpg\" alt=\"Dragon bust with a print-in-place spine\" style=\"width:32%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eGood to know before you buy\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e the US (110–120 V) model draws up to 1,850 W for 3–5 minutes while the bed heats, and about 240 W printing PLA or 540 W printing PC after that. Plan for a dedicated 20 A circuit, or turn on Low Power Mode (1,050 W max), which heats the bed and chamber more slowly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace:\u003c\/strong\u003e the printer with AMS 3H measures 493 × 571 × 587 mm. Bambu Lab recommends 593 × 1,056 × 1,306 mm of clearance, and it ships in a 600 × 630 × 700 mm box at 36.28 kg (80 lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Wi-Fi 6 only. There is no Ethernet port, network kill switch or 802.1X support, so check with your IT team if you're buying for a school or company network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom:\u003c\/strong\u003e operating temperature 10–30 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box (H3C Combo)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab H3C 3D Printer\u003c\/li\u003e\n\u003cli\u003eAMS 3H (9-spool fully enclosed filament system)\u003c\/li\u003e\n\u003cli\u003e9 × PrintTools (8 × 0.4 mm for 1.75 mm filament, 1 × 0.4 mm for 2.85 mm filament)\u003c\/li\u003e\n\u003cli\u003eTextured PEI flexible build plate\u003c\/li\u003e\n\u003cli\u003eStarter accessories, tools, and documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild volume (L × W × H)\u003c\/th\u003e\n\u003ctd\u003e330 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool changer\u003c\/th\u003e\n\u003ctd\u003eBambu Lab SwapTek™ 9-Tool Switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosure\u003c\/th\u003e\n\u003ctd\u003eFully enclosed; steel chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzles\u003c\/th\u003e\n\u003ctd\u003eHardened steel; 0.4 mm included; 0.2, 0.4, 0.6 and 0.8 mm supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e350 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax bed temperature\u003c\/th\u003e\n\u003ctd\u003e120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eActive chamber heating\u003c\/th\u003e\n\u003ctd\u003eUp to 65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax toolhead speed \/ acceleration\u003c\/th\u003e\n\u003ctd\u003e1,400 mm\/s \/ 25,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax hotend flow\u003c\/th\u003e\n\u003ctd\u003e40 mm³\/s (Bambu Lab ABS at 280 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament diameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm; 2.85 mm (bypass feed only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported filaments\u003c\/th\u003e\n\u003ctd\u003ePLA, PETG, PCTG, TPU, EVA, PE, PP, PHA, PVA, BVOH and support filament; ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS; carbon\/glass-fiber-reinforced PLA, PETG, ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA and PPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild plates\u003c\/th\u003e\n\u003ctd\u003eTextured PEI flexible steel plate included; also supports Cool Plate SuperTack and Engineering Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir filtration\u003c\/th\u003e\n\u003ctd\u003eH11 HEPA plus granulated coconut-shell activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCameras\u003c\/th\u003e\n\u003ctd\u003eLive view and toolhead cameras (1920 × 1080); optional BirdsEye camera (3264 × 2448)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensors\u003c\/th\u003e\n\u003ctd\u003eDoor, filament run-out, nozzle clumping, filament odometry, power-loss recovery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExpansion\u003c\/th\u003e\n\u003ctd\u003eCraftTool support (CutTool, DrawTool, and more coming)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen and storage\u003c\/th\u003e\n\u003ctd\u003e5-inch 854 × 480 touchscreen; 64 GB eMMC and USB port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eBambu Studio; third-party slicers that export standard G-code (PrusaSlicer, SuperSlicer, Cura) work, but some advanced features may not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAMS 3H\u003c\/th\u003e\n\u003ctd\u003e9 spools; 2-slot dryer up to 85 °C; RFID; sealed storage with active moisture discharge; spools 50–68 mm wide, 197–202 mm diameter; 480 × 562 × 460 mm, 9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower (US model)\u003c\/th\u003e\n\u003ctd\u003e100–120 VAC, 50\/60 Hz; 1,850 W max; 1,050 W in Low Power Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions \/ weight\u003c\/th\u003e\n\u003ctd\u003e493 × 571 × 587 mm; 36.28 kg including AMS 3H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eIncluded services\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFree shipping in the 48 contiguous US states\u003c\/li\u003e\n\u003cli\u003e2-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure the H3C is the right fit? Try our free \u003ca href=\"https:\/\/shop3duniverse.com\/pages\/product-recommendations\"\u003eAI Product Recommendation tool\u003c\/a\u003e, \u003ca href=\"https:\/\/calendly.com\/3d-universe\/30min\"\u003ebook a free 30-minute consultation\u003c\/a\u003e, or call (800) 689-4344.\u003c\/p\u003e\n","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":68041200304448,"sku":"PF008-P+SA017-US","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0380\/5149\/files\/1-1-1-compressed_0e763b64-cc43-499a-acc5-c14c9fc9f2b4.jpg?v=1793913539","url":"https:\/\/shop3duniverse.com\/products\/bambu-lab-h3c-9-material-tool-changer-3d-printer","provider":"3D Universe","version":"1.0","type":"link"}