3D Universe 2.85mm ABS Filament Bundle
High-quality for your next masterpiece
Includes 16 spools in a variety of colors
High-quality filament, made in the USA
Material Compatibility Matrix
Available in two spool sizes: 750g or 1kg
Note: Due to the spool holder design, the 750g spool size is recommended for the Ultimaker 3 and Ultimaker 3 Extended.
Note: Colors may be substituted based upon availabiliity. Bundles can be customized upon request.
3D Universe 2.85mm ABS Filament Bundle
This bundle includes 16 spools of 3D Universe 2.85mm ABS Filament in your choice of 750g or 1kg spools. Each bundle includes the following:
- (1) Black
- (1) White
- (1) Natural
- (1) Silver
- (1) Brown
- (1) Light Blue
- (1) Dark Blue
- (1) Grape
- (1) Green
- (1) Neon Orange
- (1) Red
- (1) Yellow
- (1) Red Delicious
- (1) Rose Tan
- (1) Rich Teal
- (1) Black Raspberry
* Note: Colors may be substituted based upon availability. Bundles can be customized upon request.
Lego-tough Thermoplastics
3D Universe ABS is made from Acrylonitrile Butadiene Styrene, a tough, thermoplastic polymer. It's the same material from which Lego is made. Whereas PLA tends to be brittle, ABS can withstand more stress before cracking. ABS is a low hazard material and should be handled with care.
High Standards of Quality
Having close to 30 years of experience manufacturing a very diverse array of plastics, our filament manufacturer has the process knowledge required to produce high-end filaments. Our ABS has a diameter tolerance of +/- 0.08 mm, which ensures a consistent flow rate. The filament is tightly wound to guard against tangling and each spool is shipped in air-tight packaging to shield against the elements.
Made in the U.S.A. with Artist-friendly Prices
Because our filament is manufactured in the United States, our actual costs are significantly lower. The quality level is exceptionally close to that of European-imported filaments, but far more cost-effective.
Works With 3D Printers That Accept 2.85 mm or 3.0 mm
3D Universe PLA is designed for printers that work with standard 2.85 mm and up to 3.00 mm size filaments. This includes, but is not limited to:
We have personally tested this filament with our Ultimaker 2+'s and Ultimaker 3's and are absolutely pleased with the results.
Choosing Between 2.85 mm and 3.0 mm
There is some confusion surrounding 2.85 mm vs 3.0 mm filament. The truth is, most filament labeled as 3.0 mm is actually closer to 2.85 mm in diameter - with very rare exceptions. 3D Universe filament is truly 2.85 mm in diameter, with a tolerance of +/- .08 mm. Therefore, it works exceptionally well in Ultimaker printers, as well as printers that require 3 mm filament, such as the LulzBot TAZ or Mini. Simply configure your slicing software for a filament diameter of 2.85 mm and you can expect optimal results.
