Only Independently Tested, and Verified, UFP and VOC filtration solution.
Features: UFP and VOC Filtration, Thermal Runaway Protection, Automatic Fire Suppression, Humidity Control, Heated Build Chamber, Touch Screen, Studio Lighting, Door and Smoke Sensors, Remote HD Video Monitoring and Control, HD Time Lapse Videos and Pictures, WiFi, Noise Dampening, USB Printer Connectivity, Spool Holders, Castors, Unobstructed Printer Access, and Burn and Theft Prevention.
3D Print Clean enclosures are the highest quality available. Check out this video for an look at the features and capabilities. This video features the model 870 Pro, but the features for the model 660 Pro are the same, except for the size.
Patent Pending Multi-Pass Recirculating Filtration design confines the contaminated air, and passes the air through the filter media repeatedly, where each pass removes a small percentage of the total UFPs and VOCs, until the majority has been removed. This air scrubbing process can run hundreds, to thousands of times, depending on the print duration.
Our solution has been independently tested and verified by IIT, The Illinois Institute of Technology, the university that first identified UFPs and VOCs emissions from 3D Printers and the related health concerns.
Thermal runaway is where a printer's temperature regulator fails. Unchecked, thermal runaway can lead to printer damage and a fire. Our enclosures monitor the temperature, and if needed, terminates power.
In the event of a fire, the automated fire suppression system activates, filling the enclosure with ABC fire suppressant.
Applied to hot and smoldering surfaces, ABC powder fuses and swells to form a barrier which excludes oxygen, extinguishing the fire, and preventing re-ignition.
This system contains the fire within the enclosure, preventing expensive, smoke, fire, and water damage to the building.
Humidity can damage your filament, resulting is blocked extruders and failed prints. All of our enclosures come with a large non-toxic orange silica cartridge that reduces humidity, and visually indicates when the cartridge needs to be changed. In addition, the enclosure touchscreen displays the current humidity level.
A humidity cartridge is also available for the cabinet to keep your stored filament dry.
Maintaining a elevated temperature in the enclosure improves print quality by reduce warping, curling, and cracking.
Our eco-friendly, total heat recovery, heated build chamber, not only captures, and contains the heat generated from your printer's print head, and print bed, but captures all heat from the enclosure's power transformers, LED lights, and other electronics.
Our enclosure features with a 7" Touchscreen, the touchscreen displays the camera status, Wifi indicator, system status, current filtration speed, lighting level, temperature, humidity, thermal cutoff level, and number of days until your next filter change.
A setting icon, enables you to set enable/disable the camera, enable/disable and change Wifi setting, set location, adjust the lighting level, adjust the thermal cutoff temperature, adjust the filtration speed, and reset the filter counter when replacing the filters.
An update icon will appear when new features are available.
Showcase your printer, and print, with 2400 lumens of 5000K dimmable, bright white light.
Our enclosure feature three ultrasonic sensors that detect when one, or more doors, are open. When open, the touchscreen presents a visual warning, and the enclosure disables the filtration system. This ensures all doors are closed during printing, which is required for proper filtration.
A motion sensor watches your printer for movement, and records the activity, this data can be used to determine when a print has been completed, if an unauthorized user is using the printer, or to calculate usage of a shared printer.
Watch your print from your phone, monitor current filtration speed, lighting level, temperature, humidity, thermal cutoff level, and number of days until your next filter change.
Record time lapse videos and pictures of your prints.
* If Intellectual Property is a concern, the camera can be disabled.
Today, WiFi enables software updates. In the future, WiFi will enable remote operation, monitoring, and other features. These new features will be available via software update.
Printers can be noisy, our enclosure suppresses the noise generated by your printer, enabling a more peaceful and focused workplace.
To support printers that would like to use, or require, USB connections, the USB pass through, enables USB connectivity within the enclosure's sealed environment.
Many printers come with sub optimal filament reel locations, making them a challenge to fit into an enclosure. Our spool holders replace your printer spool holder, holding two, or four spools of filament, in an optimal location over your printer.
Our spool holders are highly adjustable, to accommodate almost any size of filament.
Castor wheels enable movement within, and to and from, classrooms.
Locking doors prevent unauthorized use, theft, and keeps small hands away from hot parts
Three full height doors, with 170 degrees opening, and a wide top window, provides un-obstructive access, and visibility to your 3D Printer.
Store, and share print videos via social media, and review printer and enclosure stats.
Our team, is developing a host of features to dramatically expand your enclosure's capabilities. When ready, these features will be available at no additional cost.
150 CMF German 3-phase Backward-curved impeller, high efficiency with ball bearing smooth operation, and a 55000 hour/6.2 years of continuous use service life.
As printers get faster, offer higher resolution, and more material choices, upgrades are inevitable.
Built from the highest quality parts, a heavy aluminum frame, honeycomb aluminum flooring, and strong plastics, our enclosures will last for many printer generations.
|Hardware||19" UFP Filter
19" VOC Filter
7" LED Touch Screen
2.4GHz 802.11n WiFi
1.2GHz 64-bit quad-core ARMv8 CPU
1080p HD Video Camera
150 CFM, 24V, 3-phase, Speed Adjustable Filtration Blower Motor
LED, 2400 lumen, 5000K, 40W
Universal 115v/220v AC input
Ultrasonic Transducer Speaker
Ultrasonic Door Sensors
|Power Consumption||Controller: 5V - 1.5W to 6.7W
LED Screen: 5V - 2.5W
Lighting: 12V - 0 to 40W
HD Camera: 5V - 0 to 1.25W
Filtration: 24V - 0 to 78W
Speaker: 9.8V - 0 to 24W
|Dimensions and Weight||External: 1020mm W (40.15") x 950mm H (37.40") x 1020mm D (40.15")
Internal: 810mm W (31.88") x 810mm H (31.88") x 810mm D (31.88")
Width - Duct to duct: 685.8mm (27")
Width - Door to door 838.2mm (33")
Depth - Duct to duct: 685.8mm (27")
Depth - Duct to filter: 711.2mm (28")
Shipping weight – 120 lbs
|Certification||Filtration Independently certified by the Illinois Institute of Technology - Chicago
|Delivery||The Model 870 Pro Enclosures, Cabinets, Stands, and Stacks ship fully assembled. To support smaller entryways, the Model 870 Enclosure, Cabinet, Stand, and Stack, are also available as unassembled units.|
Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...
Join our mailing list to get the Deal of the Week along with other goodies.
You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.