3D Potter - Factory-Prepared Clay - PRAI

By 3D Potter

3D Potter - Factory-Prepared Clay - PRAI

By 3D Potter

28.15


Availability: In-Stock Now

Developed by the Spanish company CERAMIC COLLET, S.A., and specifically adapted for 3D printing, PRAI Clay is a high-fire, white-body with 40% impalpable grog (up to 80 mesh). Its characteristics offer an excellent behavior during drying and firing, and is often appreciated for its particular white ivory color, making it an excellent ware for glazes and coloring oxides. Available in extruded body with the ideal humidity for 3D printing, and presented in a practical cylindrical format with double packaging. Each bag is double packed and weighs 11 lbs.

  • Firing range: Cone 6-10 (2269º-2381ºF)
  • Biscuit: Cone 06 (1855ºF)
  • Water content: 22%
  • Plasticity (IP Atterberg): 16
  • Carbonate content (CaCO3): 0%
  • Drying shrinkage: ≈ 8.5%
  • Firing shrinkage at Cone 10: 7.0%
  • Porosity (water absorption) at Cone 10: 0.0%
  • Dry bending strength: 3.0 N/mm2
  • Fired bending strength at Cone 10: 45.3 N/mm2
  • Thermal coefficient (a25-500ºC): 52.6x10-7ºC-1

The real advantage with pre-prepared and de-aired clay, is there is no need for a pug mill. This simplifies the whole process and makes the initial startup and learning experience simpler. All that you need is a wall-mounted hand loader and Scio pre-prepared clay.

It's a simple process of unwrapping the clay and forming it into a cylinder small enough to place inside the hand loader. At this point the polycarbonate tube is attached to the bottom of the hand loader and the clay is gently pushed into the tube. That's it. At this point you're ready to go. Mount the tube into the extruder and you will have superior results from the very beginning.

NOTE: 3D Universe is authorized to sell this product in the United States of America, only.

Developed by the Spanish company CERAMIC COLLET, S.A., and specifically adapted for 3D printing, PRAI Clay is a high-fire, white-body with 40% impalpable grog (up to 80 mesh). Its characteristics offer an excellent behavior during drying and firing, and is often appreciated for its particular white ivory color, making it an excellent ware for glazes and coloring oxides. Available in extruded body with the ideal humidity for 3D printing, and presented in a practical cylindrical format with double packaging. Each bag is double packed and weighs 11 lbs.

Get the Quality Filament You Need

Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...

Save More on 3D Gear

Join our mailing list to get the Deal of the Week along with other goodies. You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.