Ultimaker Essentials gives you the tools you need to start 3D printing at work, while meeting IT requirements. With features including remote printer management, firmware firewalls, verified plugins, and direct software support.
Note: We are authorized to sell this product in the United States, only.
WARNING: This filament, when used in the operation of 3D Printers, can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer. www.P65Warnings.ca.gov
ALWAYS OPERATE THIS PRODUCT IN A WELL-VENTILATED AREA.
This value-priced bundle includes the Ultimaker S5 printer, along with 16 spools of Ultimaker NFC enabled filament in a variety of materials.
In addition to the 750g spools of Tough PLA and PVA included with the printer, this bundle includes the following:
Note: Filament colors may be substituted based upon availability
The new, dual-extrusion Ultimaker S5 is Ultimaker's most advanced 3D printer to-date, with the clear objective of meeting the needs of professional users. Most noticeable is the larger build volume which, at 330 x 240 x 300 mm (13 x 9.5 x 11.8 inches) greatly increases the range of the S5's potential applications. Moreover, the S5 comes equipped with a number of technological refinements:
If you are new to the Ultimaker S5, we strongly recommend you watch our overview video, which is just under 7 minutes.
Unlike its predecessors, the Ultimaker S5 print bed, with rare exceptions, never needs to be manually leveled. Unbox your machine and immediately begin printing. Moreover, improvements in the active bed leveling system ensure perfect first layer adhesion for every print job.
The S5 also comes equipped with glass doors, reducing airflow and increasing temperature stability within the build chamber.
Moreover, you'll spend far less time watching long-running print jobs, as the new onboard filament sensor detects when filament runs out and automatically pauses the print job.
The Ultimaker S5 comes standard with Ultimaker's proven print core design. Within a matter of seconds, print cores can be swapped. Select from a range of nozzle sizes (0.8 mm, 0.4 mm and 0.25 mm) depending on your specific application.
The Ultimaker S5's brand new touchscreen provides an intuitive interface for managing print jobs and machine maintenance. It even includes a visual preview of each print job. With an enhanced user experience, both new and experienced Ultimaker S5 users will be able to get their job done quickly and efficiently.
Built-in Wi-Fi and Ethernet connectivity, combined with the new iOS and Android mobile apps provide maximum connectivity to the Ultimaker S5. Deploy the latest firmware upgrades with minimal interruption and efficiently manage your print jobs while on or offsite. While on your local network, monitor your print jobs using the printer’s onboard camera via your mobile phone. And receive push notifications to your mobile phone about any issues with your print jobs, regardless of your location. Ultimaker continues to support the USB flash drive as an interface, as well.
Minimize time spent configuring your print jobs by leveraging Ultimaker's integrated materials. The Ultimaker S5 automatically detects Ultimaker NFC-enabled filament. And combined with Ultimaker Cura's material profiles, your print jobs are automatically loaded with optimized settings specific to your selected filament.
There's a wide range of Ultimaker-brand materials to choose from: Tough PLA, PLA, Nylon, ABS, CPE, CPE+, Polycarbonate, TPU 95A, Polypropylene, PVA, and Breakaway. Additionally, as with any Ultimaker 3D printer, you’re free to use any brand and type of material you wish. The Ultimaker S5 can handle any 2.85mm materials that extrude up to 280C.
|Technology||Fused Filament Fabrication|
|Print Head||Dual-extrusion print head with an auto-nozzle lifting system and swappable print cores|
|Build Plate||Heated glass build plate|
Dual extrusion w/ geared feeders
Swappable print cores
NFC-based filament detection
Heated-bed with active leveling
Wi-fi and ethernet connectivity
Stand-alone USB stick printing
|Shipping box dimensions||650 x 600 x 700 mm|
|Shipping weight||64 pounds (29 kg)|
|Filament Size||2.85 mm|
|Print core nozzle sizes||0.25mm, 0.4mm (included), 0.8mm|
|Maximum temperature||280 Celsius|
|Layer resolution||0.25 mm nozzle: 150 - 60 micron
0.4 mm nozzle: 200 - 20 micron
0.8 mm nozzle: 600 - 20 micron
|Positioning precision X / Y / Z||6.9 / 6.9 / 2.5 microns|
|Slicing software||Ultimaker Cura (free download)|
|File types||STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG|
|Supported OS||Windows / Mac / Linux|
Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...
Join our mailing list to get the Deal of the Week along with other goodies.
You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.